Running Test - Toshiba QOSMIO G40 Maintenance Manual

3.23 Running Test

3.23 Running Test
3.23.1 Function Description
Some devices is tested in an attended operation. The name of tested devices and subtest
number are displayed on the screen while executing the test.
The following message is displayed before the test.
1 - Printer wrap around test (Y/N)?
2 - Serial#A wrap around test (Y/N)?
3 - FDD test
This function automatically executes the following tests in sequence:
1. System test (subtest 01)
2. Memory test (subtests 01, 02, 06)
3. Display test (subtest 01)
4. Real timer test (subtest 02)
5. HDD test (subtests 01)
6. FDD test (subtests 02)
The system automatically detects the number of floppy disk drives connected to the computer
for the FDD test.
3.23.2 Operations
1. Select 6 from the Diagnostic Menu and press Enter, the following messages will
appear in the display in order.
FDD write/read test (Y/N) ?
Printer wrap around test (Y/N) ?
Serial wrap around test (Y/N) ?
CD-ROM/DVD-ROM test (Y/N) ?
2. To execute the test, press Y (yes) and Enter. To cancel the test, press N (no) and
Enter. If you execute the selectable test, follow the indication message in the display.
3. After setting the selectable test, the test starts automatically. To terminate the program,
press Ctrl + Break.
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
(R:read/W:read-write)?
Y: The test is executed.
N: The test is not executed.
R: The sequential read is selected
W: The sequential read/write is selected
3 Tests and Diagnostics
[CONFIDENTIAL] 3-49