Bluetooth Module - Toshiba QOSMIO G40 Maintenance Manual

4 Replacement Procedures
4.9

Bluetooth module

Removing the Bluetooth module
The following describes the procedure for removing the Bluetooth module (See Figure 4-16).
1. Peel off the glass tape.
2. Disconnect the Bluetooth antenna cable from the connector on the Bluetooth
module.
3. Push the stopper as shown in the figure below and take out the Bluetooth module
from the slot.
4. Disconnect the Bluetooth flat cable from the connector on the Bluetooth module.
5. Disconnect the Bluetooth flat cable from the connector CN4400 on the system board.
CN4400
4-26
Downloaded from LpManual.com Manuals
Stopper
Bluetooth flat cable
Figure 4-16 Removing the Bluetooth module
[CONFIDENTIAL]
4.9 Bluetooth module
Glass tape
Bluetooth module
Bluetooth antenna cable
QOSMIO G40 Maintenance Manual (960-632)