Toshiba QOSMIO G40 Maintenance Manual page 224

3 Tests and Diagnostics
(h) Beep Volume
(i) Diagnostic Mode
(j) USB Sleep and charge
(k) Language During Bootup
7. Configuration
This option lets you set the device configuration.
3-88
Downloaded from LpManual.com Manuals
Enabled Enables the Qosmio AV Controller and the Front operation
panel function for use (Default).
Disabled Disables the Qosmio AV Controller and the Front
operation panel function for use.
This Option sets up the volume of a Beep sound.
Medium→High→OFF→Low
This option enables/disables the HW Diagnostic test function.
Enabled Disables the HW Diagnostic test function. (Default)
Disabled Enables the HW Diagnostic test function.
This Option sets up whether a power supply is supplied to a USB device,
when PC is in a Sleep mode state.
Disabled
Enabled（Mode1）
Enabled（Mode2）
This option is displayed only a TCL model.
The language of the message which bios displays can be chosen.
English or French can be chosen.
All Devices BIOS sets all devices.
Setup by OS Initializes devices, which is needed to load an operating
system. Operating system initializes other devices.
(Default)
[CONFIDENTIAL]
A power supply is not supplied in a Sleep mode
state. (Default)
A power supply is supplied in a Sleep mode
state.
A power supply is supplied in a Sleep mode
state.
QOSMIO G40 Maintenance Manual (960-632)
3.30 SETUP