1Bit Amp - Toshiba QOSMIO G40 Maintenance Manual

4.22 1bit amp

4.22 1bit amp
Removing the 1bit amp
The following describes the procedure for removing the 1bit amp (See Figure 4-43).
1. Remove the following screw and 1bit amp.
2. Disconnect the 1bit amp cable from the connector on the 1bit amp.
M2.5x4B FLAT HEAD
Installing the 1bit amp
The following describes the procedure for installing the 1bit amp (See Figure 4-43).
1. Connect the 1bit amp cable to the connector on the 1bit amp.
2. Install the 1bit amp to the cover assembly with the edge under the guide and secure it
with the following screw.
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
• M2.5×4B
FLAT HEAD screw
1bit amp
Figure 4-43 Removing the 1bit amp
• M2.5×4B
FLAT HEAD screw
1bit amp cable
[CONFIDENTIAL]
4 Replacement Procedures
×1
Guide
×1
4-59