Toshiba QOSMIO G40 Maintenance Manual page 269

4.10 Wireless LAN card
Installing the wireless LAN card
The following describes the procedure for installing the wireless LAN card (See Figure 4-17
to 4-20).
1. Insert slantwise the wireless LAN card into the connector CN2600 on the system
board and press it to connect firmly.
2. Secure the wireless LAN card with the following screws.
3. Connect the wireless LAN antenna cables to the terminals (white cable to MAIN,
black cable to AUX for the two antenna cables and white cable to 1, black cable to 2
and gray cable to 3 marked on the wireless LAN card for three antenna cables) on the
wireless LAN card.
4. Install the wireless LAN card hold plate and secure it with the following screw.
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
• M2.0×4B
BIND screw
• M2.5×4B
FLAT HEAD screw
4 Replacement Procedures
×2
×1
[CONFIDENTIAL] 4-31