4 Replacement Procedures
4.26
AV controller button
Removing the AV controller button
The following describes the procedure for removing the AV controller button (See Figure 4-
48).
1. Disconnect the AV switch cable from the connectors on the AV controller switch and
AV function button.
2. Peel off the insulator.
3. Remove the following screws and AV controller switch.
4. Disconnect the AV controller cable from the connector on the AV controller button.
5. Peel off the AV controller button.
4-66
Downloaded from LpManual.com Manuals
• M2.5×4B
FLAT HEAD screw
M2.5x4B FLAT HEAD
AV switch cable
AV controller button
Figure 4-48 Removing the AV controller button
[CONFIDENTIAL]
4.26 AV controller button
×2
AV controller switch
AV controller cable
Insulator
QOSMIO G40 Maintenance Manual (960-632)