Toshiba QOSMIO G40 Maintenance Manual page 330

4 Replacement Procedures
Installing the LCD assembly/Hinge assembly
The following describes the procedure for installing the LCD assembly/Hinge assembly (See
Figure 4-65 to 4-67).
1. Install the hinge assembly to the LCD assembly while engaging the latches.
2. Secure the hinge assembly and LCD assembly with the following screws and stick
the mask seals in place.
3. Close the display and turn the cover assembly face down.
4. Arrange the wireless LAN antenna cable, Bluetooth antenna cable, tweeter cable
and internal microphone/web camera cable in place.
5. Stick the cushion side of the insulator first and close the other side of the insulator.
6. Stick the laminate in palace.
7. Turn up the insulator and arrange the LCD cable to the guides of the cover assembly.
4-92
Downloaded from LpManual.com Manuals
• M2.5×8B
FLAT HEAD screw
[CONFIDENTIAL]
4.35 LCD assembly/Hinge assembly
×6
QOSMIO G40 Maintenance Manual (960-632)