Toshiba QOSMIO G40 Maintenance Manual page 200

3 Tests and Diagnostics
Subtest03
Subtest04
3-64
Downloaded from LpManual.com Manuals
Antenna check & communication test of 11b mode
This subtest execute transmitting/receiving test in 802.11b mode using the
main antenna first. If a defective is not found during the test,
transmitting/receiving test in 802.11b mode using the AUX antenna is
automatically executed.
If a defective is not found during the test, OK message will appear in the
display. Press any key and return to the test menu.
If a defective is found during the test, NG message will appear in the display.
When pressing any key, the following message (which antenna is defective) is
displayed
**************************************
*
* Main Antenna Test : NG !!
*
**************************************
**************************************
*
* Aux Antenna Test : NG !!
*
**************************************
Press any key and return to the test menu.
Communication test of 11a mode
This subtest execute transmitting/receiving test in 802.11a mode using the
main antenna.
If a defective is not found during the test, OK message will appear in the
display. Press any key and return to the test menu.
If a defective is found during the test, NG message will appear in the display.
When pressing any key, the following message is displayed
********************************************
*
* 11a Communication Test :
*
********************************************
Press any key and return to the test menu.
When a defective is detected in the test, following typical cause is considered.
•
Connection of wireless LAN card
•
Defective wireless LAN card
•
Disappearance of MAC address data
Checking the connection, execute the subtest again.
[CONFIDENTIAL]
3.27
Wireless LAN Test Program on DUT PC(Intel-made)
NG !!
QOSMIO G40 Maintenance Manual (960-632)
*
*
*
*
*
*
*
*
*