Toshiba QOSMIO G40 Maintenance Manual page 226

3 Tests and Diagnostics
NOTE: Too hot condition may cause defect on the CPU. When the hot condition
(b) PCI Express Link ASPM
(c) Enhanced C-States
3-90
Downloaded from LpManual.com Manuals
Use this option to enable or disable the CPU sleep function.
Enabled Enables sleep mode. (Default)
Disabled Disables sleep mode.
LCD Brightness
Use this option to set the level of LCD brightness.
Super-Bright Full brightness for maximum visibility.
Bright Full brightness for high visibility.
Semi-Bright Less than full brightness for saving power.
Cooling Method
Maximum Performance
Performance
Battery optimized
continues, the power is automatically turned off in resume mode.
This option set the power-saving function of PCI Express on the following
conditions.
Auto
Disabled
Enabled
[CONFIDENTIAL]
If the CPU becomes too hot, the fan turns on
automatically in a high speed to cool down the
CPU.
If the CPU becomes too hot, the fan turns on
automatically. When the CPU temperature falls
to a normal range, the fan turns off.
If the CPU becomes too hot, the processing
speed is lowered. If the temperature is still too
high, the fan turns on. When the CPU
temperature falls to a normal range, the fan is
turned off and the processing speed is increased.
PCI Express devices are not used while battery
operation. (Default)
Disable the Power-saving function and drive
with maximum performance.
PCI Express devices are not used.
QOSMIO G40 Maintenance Manual (960-632)
3.30 SETUP