Table of Contents
Advertisement
4.8 MDC
Installing the MDC
The following describes the procedure for installing the MDC (See Figure 4-15).
1. Connect the modem cable to the connector on the MDC.
2. Connect the MDC to the connector CN3010 on the system board by pressing it
carefully. Be careful not to damage the MDC and connector.
3. Secure the MDC with the following screws.
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
• M2.0×4B
BIND screw
4 Replacement Procedures
×2
[CONFIDENTIAL]
4-25
Advertisement
Chapters
Table of Contents
Troubleshooting
