St Tuner - Toshiba QOSMIO G40 Maintenance Manual

4.19 1PstP tuner
st
4.19 1
Removing the 1
The following describes the procedure for removing the 1
1. Remove the following screws securing the 1
2. Open the left and right latches and remove the 1
on the system board.
Installing the 1
The following describes the procedure for installing the 1
1. Insert the 1
press it to connect firmly.
2. Secure the 1
QOSMIO G40 Maintenance Manual (960-632)
Downloaded from LpManual.com Manuals
tuner
st
tuner
• M2.0×4B
BIND screw
M2.0x4B BIND
Figure 4-40 Removing the 1
st
tuner
st
tuner into the connector CN2400 on the system board slantwise and
st
tuner with the following screws.
• M2.0×4 B
BIND screw
4 Replacement Procedures
st
tuner (See Figure 4-40).
st
tuner.
×2
st
tuner from the connector CN2400
Latch
CN2400
st
1 tuner
Latch
st
tuner
st
tuner (See Figure 4-40).
×2
[CONFIDENTIAL] 4-55