Pc Card Slot - Toshiba QOSMIO G40 Maintenance Manual

4 Replacement Procedures

4.31 PC card slot

Removing the PC card slot
The following describes the procedure for removing the PC card slot (See Figure 4-59).
1. Remove the following screws securing the PC card slot.
2. Pull up the PC card slot straight and remove it from the connector CN2110 on the
system board.
4-82
Downloaded from LpManual.com Manuals
• M2.0×3C
S-THIN HEAD screw
• M2.0×8C
BIND screw
PC card slot
CN2110
M2.0x8C BIND
Figure 4-59 Removing the PC card slot
[CONFIDENTIAL]
×2
×2
M2.0x3C
S-THIN HEAD
QOSMIO G40 Maintenance Manual (960-632)
4.31 PC card slot