Calling One Site After Another By Sequential Dialing - Panasonic WJ-AV20 Operating Instructions Manual

Calling One Site After Another by Sequential Dialing

The control sites can be called one after another to monitor them.
Either enter the quick dial number 000 for sequential dialing, or press the ONE TOUCH DIAL button assigned to quick dial
number 000. This starts sequential dialing to call one site after another.
2
Remote Controller WV-CU20
ONE TOUCH DIAL
1 2 3
1
STEP1 STEP2
DIAL
3
1 2
MEMORY
To use a ONE TOUCH DIAL button
Remote Controller WV-CU20
ONE TOUCH DIAL
1 2 3
3
STEP1 STEP2
DIAL
1 2
MEMORY
1
4 5
7 8
0
ESC
MENU
TELE WIDE AF
To use the MEMORY button
Note
Whether sequential dialing is to
end upon completion of a round of
the sites, or is to be repeated till it
is terminated, can be set using the
setup menu.
18
1 Press the MEMORY button or the DIAL button.
VIDEO ALM ACK
• [
4 5
AUTO/MANU
STEP3
• [
CALL
3
REDIAL
2 Enter the quick dial number 000 by pressing the numeric
buttons and press the ENTER button. Then press the CALL
VIDEO ALM ACK
button. Or press the ONE TOUCH DIAL button assigned to the
quick dial number 000.
2
4 5
AUTO/MANU
STEP3
CALL
• [ SEQ. DIALING] menu appears on the monitor screen.
3
REDIAL
6
9
DELETE
#
ALM MEMORY
AUDIO MUTE
ENTER
NEAR
FAR
• Those destinations registered in the directory whose Sequential Dial setting
• During communicating with the destination, press the ONE TOUCH DIAL 4
• The starting destination for the dialing can be set on the menu.
• If the destination called by Sequential Dialing is busy or there is no
QUICK DIAL] menu appears on the monitor screen when the QUICK
button is pressed.
DIAL] menu appears on the monitor screen when the DIAL button is
pressed.
Enter 000, then press ENTER button.
QUICK DIAL
QUICK#
NO.000
DIAL#(1B):
DIRECTORY:
001
002
003
004
005
↑↓←→:MOVE CALL:CALL DEL:BS
ENT:SELECT DIAL/ESC:CLEAR
SEQ. DIALING
QUICK#
CONNECTING
DIAL/ESC:QUIT AND DIAL NEXT SITE
Quick dial number and title
is ON are called in sequence from the smallest number upward. When the
duration (dwell time) set on the menu has passed, the next destination is
automatically called and displayed the video.
(VIDEO AUTO/MANU) button to release the dwell time for selected video
and continue monitor manually. Pressing that button again will restore the
dwell time for that video and will continue to call the next destination by
Sequential Dialing.
response, it will be automatically skipped and will call the next destination.
d
/
No. of sites connected by
sequential dialing