Panasonic WJ-AV20 Operating Instructions Manual page 9

$3 Direction Buttons (t s )
These buttons are used to operate the Pan/Tilt head
manually when a camera equipped with the specified
function is connected to the VIDEO IN 1 on the rear of
the AV Codec. They will also move the cursor to the
desired position while the menu is displayed on the
monitor screen.
$4 Escape Button (ESC)
This button is used to escape and execute the currently
highlighted setting on the setup menu. The monitor
screen will then return to the previous setup menu.
$5 Audio Mute Button (AUDIO MUTE)
This button is used to mute the outgoing sound from the
local site.
Pressing it again will restore the sound.
$6 Enter Button (ENTER)
This button is used to execute a selection or access the
submenu of the selected item menu.
$7 Camera Control Buttons
These buttons are used to control any camera
equipped with the specified function that is connected
to the VIDEO IN 1 on the rear of the AV Codec.
TELE / WIDE: Adjusts camera lens zoom.
AF: Adjusts camera lens focus automatically.
NEAR / FAR: Adjusts camera lens focus.
%1 Connection Jack
This jack is used to connect with the Controller Jack on
the front of the WJ-AV20 AV Codec.
To connect to the codec, use a 6-conductor DIN cable
supplied as an accessory with the controller.
%2 Connection Port
This port is used to connect with the Controller Port on
the rear of the WJ-AV20 AV Codec.
To connect to the codec, use a 6-conductor modular
cable supplied as an accessory with the controller.
9