Calling A Site By Quick Dialing - Panasonic WJ-AV20 Operating Instructions Manual

Calling a Site by Quick Dialing

Using a MEMORY button, the corresponding site can be called without directly entering the telephone number.
Quick dial No. 000 is exclusive for sequential dialing. For details, refer to section [
Sequential Dialing].
Remote Controller WV-CU20
ONE TOUCH DIAL
1 2 3
STEP1 STEP2
4
DIAL
1 2
MEMORY
1 4 5
7 8
2
0
ESC
MENU
TELE WIDE
AF
16
1 Press the MEMORY button.
VIDEO ALM ACK
4 5
AUTO/MANU
3
STEP3
CALL
3
REDIAL
6
9
2 Enter a quick dial number by pressing the numeric buttons.
DELETE
#
ALM MEMORY
AUDIO MUTE
• Enter a desired number from 001 to 200.
• When the ENTER button is pressed after entering the quick dial number,
ENTER
• A quick dial number can also be selected by moving the cursor to the num-
NEAR FAR
• An input quick dial number can be corrected using the DELETE button. (It
[ QUICK DIAL] menu appears on the monitor screen.
then the registered quick dial numbers are shown in the Directory column.
ber in the Directory column and pressing the ENTER button. An item can
be selected using the [ ] or [ ] button.
cannot be corrected after pressing the ENTER button.) The character
immediately preceding the cursor is deleted when the DELETE button is
pressed.
QUICK DIAL
QUICK#
NO.###
DIAL#(1B):
DIRECTORY:
↑↓←→:MOVE CALL:CALL DEL:BS
ENT:SELECT DIAL/ESC:CLEAR
Calling One Site After Another by