Alarm Setup [461]; Alarm Dialing Tables Setup [462, 463, 464] - Panasonic WJ-AV20 Operating Instructions Manual

Alarm Dialing Tables Setup [462, 463, 464]

4 6 0 A L A R M
4 6 1 A L A R M S E T U P
4 6 2 A L A R M D I A L I N G
4 6 3 A L A R M D I A L I N G
4 6 4 A L A R M D I A L I N G
↑ ↓
: M O V E E N T : S E L E C T
4 6 2 A L A R M D I A L I N G
M O N - S U N 0 0 : 0 0 - 0 0 : 0 0
A L A R M # 1
1 . . .
2 . . .
3 . . .
4 . . .
5 . . .
6 . . .
7 . . .
8 . . .
↑ ↓ ← →
: M O V E
Alarm input numbers
Quick dial number (First choice)
A L A R M # 1
1 . . .
2 . . .
3 . . .
4 . . .
5 . . .
6 . . .
7 . . .
8 . . .
50
↓
↓
T A B L E 1
↓
T A B L E 2
↓
T A B L E 3
E S C : P R V
d
T A B L E 1
Valid period of
the table
# 2 # 3
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
E N T : S E L E C T E C S : P R V
# 2 # 3
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
Third choice
Second choice
1 Move the cursor to item 462, 463 or 464 by
pressing the or
ENTER button (463, or 464).
The [462 ALARM DIALING TABLE 1] menu appears on the
monitor screen.
2 Move the cursor to the Alarm Number
parameter. Then press the ENTER button. The
QCK# LIST menu appears on the monitor
screen.
Select the desired quick dial number by pressing the
Direction buttons. Then press the ENTER button to enter
the selected quick dial number in the table.
3 Repeat the above procedure to enter
additional quick dial numbers.
• Specify the quick dial number to dial or redial.
• The alarm input numbers (1 to 8) in the menu corre-
spond to the SENSOR IN 1 to 8 of the SENSOR IN/
TRIGGER OUT port.
• Up to 3 quick dial numbers (including other choices)
can be specified per alarm input number.
• To delete an entered quick dial number, move the cur-
sor to it by pressing the Direction buttons. Then press
the DELETE button.
• Choices 1, 2 and 3 cannot share the same number.
Notes
• Quick dial number (000) cannot be specified in the
table.
• If the first quick dial number for alarm dialing cannot
be connected because the line is busy, then dialing
continues in the order of the second and third choic-
es.
• If the third choice dialing fails to connect, then dialing
is repeated about 1 minutes after the first choice. (It
is repeated up to three times.)
If the third call fails to connect, then the alarm dialing
is released. However, if the level type sensor is still
on at the moment, the alarm dialing will be repeated.
Press the ESC button to return to the
4
previous [460 ALARM] menu.
button. Then press the