Display images in the sequential display
Displayed images from cameras will be switched automatically.
Camera images will be displayed sequentially according to the settings performed in advance.
Screenshot 1
Start operation from the top page.
Screenshot 2
Live images will be displayed sequentially according to
the settings performed in advance.
Step 1
Click a button in the [Sequence] box of the [Control] tab.
Step 2
To stop the sequential display, click the button once
again.
When operations to display images on a single screen
(page 35) or multi-screen (page 36) are performed dur-
ing the sequential display, the sequential display will be
canceled.
Notes:
• Cameras that are out of controllable range set by the
camera partitioning function will be skipped. Refer to
the Network Setup Instructions (PDF) for further
information about the camera partitioning.
• When the [GO TO LAST] button is clicked while dis-
playing live images, playback of the latest recorded
images from the selected camera channel will start.
37