Clock Setup [410] - Panasonic WJ-AV20 Operating Instructions Manual

Clock Setup [410]

This menu lets you set the current time and date.
The time and date set by the following procedure are displayed on the monitor screen when the AV Codec power is turned on.
They are also used to manage the times and dates in the alarm history and received call history.
4 1 0 C L O C K S E T U P
1 5 / 0 7 / 9 8 W E D
. . / . . / . .
D D / M M / Y Y
← →
: M O V E D E L : C L E A R
39
1 4 : 3 4
. . : . . S E T
E S C : P R V
1 Enter the date in the order of day, month, and
year by pressing the Numeric buttons.
The day of week for the entered date will appear automati-
cally.
Notes:
• Valid dates are between the year 1999 and the year
2098.
• To set the year, enter the last two digits. Enter "00" for
the year 2000.
• To set a day or month that has only a single digit such
as January (1) or February (2), add a 0 to it. January
becomes "01" and February becomes "02"
Enter hours and minutes by pressing the
2
Numeric buttons.
Note:
To set hours or minutes for a single digit, add a 0 to it
as shown above.
Move the cursor to [SET] in the menu by
3
pressing the sbutton. Then press the ENTER
button.
The time and date are updated when the ENTER button is
pressed.
4 Press the ESC button to return to the
previous [400 SETUP] menu.