Editing By Means Of External Devices; Editing The P2 Card Data (Usb Device Mode/1394 Device Mode); Editing In The Usb Device Mode - Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual

Editing by means of external devices

Editing the P2 card data (USB DEVICE mode/1394 DEVICE mode)

You can connect a personal computer to the unit using a USB cable (for a Windows machine) or a 1394
cable (for a Macintosh machine), and operate the image data on the unit's P2 card from the computer.
Personal
computer
1394 cable (optional accessory)
For a Macintosh computer

Editing in the USB device mode.

Before editing in the USB device mode, refer to "The following conditions must be met when using a USB
connection" on page 52.
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
The thumbnail screen now appears.
2
Press [MODE] to display the thumbnail
display off screen.
3
Press [MENU].
4
Using [STOP], [PLAY] and [STILL], select
"OTHER FUNCTIONS" – "PC MODE", and
press [STILL].
5
Using [STOP] and [PLAY], select "USB
DEVICE", and press [STILL].
6
Press [MENU] twice to display the thumbnail
display off screen.
7
Hold down [MODE] for at least 2 seconds.
After "USB DEVICE" is displayed, "USB
DEVICE CONNECT" is displayed once the file
access enable status is established.
• The mode cannot be changed or menus
displayed while the USB device mode is
established.
60
USB cable
(optional accessory)
For a personal computer
running Windows
USB 2.0 connector
(Type B)
IEEE1394 input/output
connector
USB DEVICE
USB DEVICE
CONNECT
8
Edit the data on the P2 card using the
personal computer.
9
After the data has been edited, disconnect
the USB cable.
The display on the LCD monitor changes from
"USB DEVICE CONNECT" to "USB DEVICE
DISCONNECT."
• When disconnecting the cable, perform the
"safe removal of hardware" procedure at the
personal computer.
This unit
AG -H PG
10