Adding Paper; Loading Paper; Loading Paper Into The Paper Trays - Ricoh 917F Operating Instructions Manual

3. Adding Paper

This chapter describes recommended paper sizes and types, and how to load paper into the paper tray.

Loading Paper

This section describes how to load paper into the paper tray.
• When loading paper, take care not to trap or injure your fingers.
• If two paper tray units (options) are installed, do not pull out more than one tray at a time when
you are changing or replenishing paper or resolving paper jams. Pressing down forcefully on the
machine's upper surfaces can result in malfunctions and/or user injury.
• Fan the paper before loading.
• Straighten curled or warped paper before loading.
• For details about paper sizes and types, see "Recommended Paper Sizes and Types".
• To load paper in the bypass tray, see "Copying from the Bypass Tray", Copy Reference
• p.71 "Recommended Paper Sizes and Types"

Loading Paper into the Paper Trays

This section describes how to load paper into the paper trays.
• Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences and
end fence.
• Check the paper edges are aligned with the right side.
• Do not stack paper over the limit mark.
3
.
59