Tsi Print (Transmitting Subscriber Identification Print) - Ricoh 917F Operating Instructions Manual

For example, this function splits the document if the document length is 20 mm (0.79 inch) or longer than
the paper used. The document is reduced if it is less than 20 mm (0.79 inch). When a document is split, an
asterisk ( ) is inserted at the split position and about 10 mm (0.39 inch) of the split area is duplicated on
the top of the second sheet.
• Your service representative can customize this function with the following settings:
• Reduction
• Print split mark
• Overprinting
• Overprinting length
• Guideline for split
• You can adjust the overprinting and reduction lengths within the following ranges:
• Overprinting length: 4 mm (0.16 inch), 10 mm (0.39 inch), 15 mm (0.59 inch)
• Guideline for split: 5-155 mm (5 mm steps)/0.2-6.1 inches (0.2 inch steps)

TSI Print (Transmitting Subscriber Identification Print)

You can have the sender's Own Name or Own Fax Number printed on documents that this machine
receives.
Usually the sender's Fax Header is printed on received documents. When you receive an Internet Fax
document, the e-mail address of the sender is printed. If the sender has not programmed their Fax Header,
you will not be able to identify them. However, if you turn this function on, the sender's Own Name or Own
Fax Number is printed instead so you can find out where the document came from.
• You can turn this function on or off with the User Parameter (switch 02, bit 3) in the Fax Features menu.
See "Parameter Settings".
BBB045S
Printing Options
3
147