Programming Initial Set Up Of A Special Sender - Ricoh 917F Operating Instructions Manual

2. Select [Set] or [Do not Set] using [ ] or [ ], and then press the [OK] key.
Selecting [Same as Basic Settings] will result in the same setting made for [2 Sided Print] under
[Reception Settings].

Programming Initial Set Up of a Special Sender

This section describes how to program Initial Set Up of a Special Sender.
Program the "Initial Set Up" of a Special Sender.
1. Select [Fax Features] using [ ] or [ ], and then press the [OK] key.
2. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
3. Select [Program Special Sender] using [ ] or [ ], and then press the [OK] key.
4. Select [Initial Set Up] using [ ] or [ ], and then press the [OK] key.
Program Special Sender
249
6