Basic Procedure For Sending Scan Files By E-Mail - Ricoh 917F Operating Instructions Manual

Basic Procedure for Sending Scan Files by E-mail

This section describes the basic operation for sending scan files by e-mail.
1. Make sure that no previous settings remain.
If a previous setting remains, press the [Clear Modes] key.
2. If the Network Delivery Scanner or Scan to Folder screen is displayed, press [
to switch to the E-mail screen.
3. Place originals.
4. If necessary, select the original type.
For details, see "Selecting Original Type".
5. If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
6. Select the destination.
You can specify multiple destinations.
For details, see "Specifying E-mail Destinations".
7. Press [Options] to select [Sender's Name], and then specify the e-mail sender.
For details, see "Specifying the E-mail Sender".
8. If necessary, select [Return Receipt] under [Options] to make settings for the Return Receipt
function.
For details, see "Setting the Return Receipt Function".
Basic Procedure for Sending Scan Files by E-mail
1
]
21