Immediate Transmission; If Memory Runs Out While Storing An Original; Ecm (Error Correction Mode) - Ricoh 917F Operating Instructions Manual

1. Transmission
• To avoid accidentally specifying multiple destinations, you can disable broadcasting. You cannot
specify group destinations if you disable broadcasting. You can specify only one address at a time.
1
For details about how to disable broadcasting, contact your service representative.
• The Fax Features menu includes a user parameter setting (switch 17, bit 2) that enables you to
configure the machine to force the user to press [Add Dest] whenever s/he specifies a destination
using a destination key. This prevents users accidentally sending documents to the wrong destination.
See "Parameter Settings".
• p.151 "Printing a List of Files in Memory (Print TX Standby File List)"
• p.226 "Parameter Settings"

If memory runs out while storing an original

If you run out of memory while storing an original (free space reaches 0%), scanning will be stopped.
If this happens, the "Memory is full. Scanning will be stopped and only scanned page(s) will be stored."
message appears.
Press [Exit] to transmit stored pages only.
• When this happens, only the scanned pages are sent. If you want to delete the scanned pages and
cancel transmission in this case, contact your service representative.

ECM (Error Correction Mode)

If part of a transmission fails because of a line problem, the lost data is automatically resent.
• For this function to work, the other machine must have ECM.
• This function is not available with Internet Fax.

Immediate Transmission

Immediate Transmission is possible with standard fax transmission and IP-Fax transmission.
• Internet Fax is performed using only Memory Transmission, which automatically starts transmission
after storing documents in memory.
24