System - Ricoh 917F Operating Instructions Manual

System

This section describes the user tools in the System menu under Printer Features.
Print Error Report
Select this to have an error report printed when a printer or memory error occurs.
The default setting is [Off].
Auto Continue
You can select this to enable Auto Continue. When it is On, printing continues after a system error
occurs.
The default setting is [Off].
Memory Overflow
Select this to have a memory overflow error report printed.
The default setting is [Do not print].
Rotate by 180 Degrees
Specify whether to rotate the print image 180 degrees relative to the paper orientation.
The default setting is [Off].
Auto Delete Temporary Jobs
You can select to automatically delete print jobs temporarily stored in the machine.
The default setting is [Off].
If you select [On], you can set up to 200 hours for auto file deleting.
Auto Delete Stored Jobs
You can select to automatically delete print jobs stored in the machine.
The default setting is [On], "3" day(s).
If you select [On], you can set up to 180 days for auto file deleting.
Print Compressed Data
Specify whether to uncompress and extract compressed job data before printing it.
The supported compression format is GZIP.
The default setting is [Off].
Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority, according to paper size
or resolution.
Duplex
You can select to have print on both sides of each page.
The default setting is [Off].
System
5
111