Memory Transmission - Ricoh 917F Operating Instructions Manual

When sending by IP-Fax
To send by IP-Fax, specify the protocol. After you specify the protocol,
display column.
If you are using a gatekeeper server, select H.323.
If you are using a SIP server, select SIP.
• For details about IP-Fax or Internet Fax transmission, see "IP-Fax Functions" and "Internet Fax
Functions".
• p.27 "IP-Fax Functions"
• p.31 "Internet Fax Functions"

Memory Transmission

Memory Transmission mode has standard fax, Internet Fax, and IP-Fax.
• If there is a power failure (the main power switch is turned off) or the machine is unplugged for about
twelve hours, all the documents stored in memory are deleted. As soon as the main power switch is
turned on, the Power Failure Report is printed to help you check the list of deleted files. Simply turning
off the power by pressing the Operation switch does not delete stored documents. See "Turning Off
the Main Power / In the Event of Power Failure", Troubleshooting.
• If memory is full (0% appears on the top right corner of the display), Memory Transmission is disabled.
Use Immediate Transmission instead.
Transmission Modes
appears in the destination
1
19