Programming An End Receiver - Ricoh 917F Operating Instructions Manual

• p.226 "Parameter Settings"
• p.241 "Program Special Sender"

Programming an End Receiver

• One end receiver can be registered for each special sender. To register two or more end receivers,
use group destination. Up to 100 destinations can be specified in a group. However, when adding
a group to another group, a maximum of 150 destinations can be specified in a group.
1. Select [Fax Features] using [ ] or [ ], and then press the [OK] key.
2. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
3. Select [Forwarding] using [ ] or [ ], and then press the [OK] key.
4. Select [On] using [ ] or [ ], and then press the [OK] key.
To cancel forwarding, press [Off] and proceed to step 6.
5. Search and select a receiver using the Quick Dial keys, and then press the [OK] key.
Pressing switches the destination.
Forwarding
6
223