Registering The Path To The Selected Destination In The Address Book - Ricoh 917F Operating Instructions Manual

2. Sending Scan Files to Folders
10. The destination is displayed. Check the destination is correct, and then press the [OK] key.
2
• If you change the protocol after entering the path name, user name, or password, a confirmation
message appears.
• Only folders that you have the read privileges for are displayed.
• If the language used for the NDS tree or by the NetWare Bindery server differs from that used by the
machine, file names in the NDS tree or on the NetWare Bindery server might appear garbled.
• If the selected NDS tree or NetWare Bindery server requires authentication, a login screen appears.
Enter a user name and password for logging on to the NDS tree or NetWare Bindery server. If you
log on to the NDS tree, enter a user name, and then enter the name of the context containing the user
object. If the user name is "user" and the name of the Context is "context", the user name will be
"user.context".
• The machine may fail to transfer the file if you do not have write privileges for the folder or there is
not enough free hard disk space.
• You can register the path to the destination in the machine's address book. For details, see "Registering
the Path to the Selected Destination in the Address Book".
• p.78 "Registering the Path to the Selected Destination in the Address Book"

Registering the Path to the Selected Destination in the Address Book

This section explains how to register folder paths you have entered manually or specified by browsing the
network to the machine's address book.
78