Programming The Realm - Ricoh 917F Operating Instructions Manual

1. System Settings

Programming the Realm

This section describes how to specify the Realm settings.
1
Program the realm to be used for Kerberos authentication.
A realm is the network area in which Kerberos authentication is used. After confirming the network
environment, specify the necessary items.
You can register up to 5 realms.
Programming the Realm
This section describes how to program the Realm.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
4. Select [Prog./Change/Delete Realm] using [ ] or [ ], and then press the [OK] key.
5. Select [Program/Change] using [ ] or [ ], and then press the [OK] key.
56