Wins - Ricoh 917F Operating Instructions Manual

4. Monitoring and Configuring the Printer
srvcert {on|off}
imca {on|off}
srvid "character string"
4
Connectinfo
clear {a each command|all}
miccheck {on|off}

wins

Use the "wins" command to configure WINS server settings.
View settings
msh> wins
• If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP address
is the valid address.
Configuration
msh> wins "interface_name" {on|off}
• {on} means "active" and {off} means "inactive".
• Be sure to specify the interface.
• wlan can be specified only when the IEEE 802.11 interface is installed.
192
Parameter
You can set the server certificate. The default is "off".
You can enable or disable the certificate when the
intermediate certificate authority is present. The default is
"off".
You can set the server ID and subdomain of the certificate
server.
Usable characters: ASCII 0x20-0x7e (128 bytes). The
default is blank.
Obtains connection information.
Returns the selected setting to its default value.
If you specify "all", all settings will be restored to their default
values.
You can enable or disable the MIC check function.
The default setting is "On" (enabled).
If you specify "Off", you cannot perform MIC checks. We
recommend you specify "On" for the MIC check function
when using this machine.
Value configured