Ip Alias Screen - ZyXEL Communications EMG2926-Q10A User Manual

Figure 49 Network > LAN > IP
The following table describes the labels in this screen.
Table 31 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Cancel

10.5 IP Alias Screen

Use this screen to have the EMG2926-Q10A apply IP alias to create LAN subnets. Click LAN
Alias.
Figure 50 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 32 Network > LAN > IP Alias
LABEL
IP Alias 1, 2
IP Address
Chapter 10 LAN
DESCRIPTION
Type the IP address of your EMG2926-Q10A in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your
EMG2926-Q10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG2926-Q10A.
Click Apply to save your changes back to the EMG2926-Q10A.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Check this to enable IP alias to configure another LAN network for the EMG2926-Q10A.
Type the IP alias address of your EMG2926-Q10A in dotted decimal notation.
EMG2926-Q10A User's Guide
91
IP