Ftp Screen - ZyXEL Communications EMG2926-Q10A User Manual

Table 60 Management > USB Media Sharing > SAMBA (continued)
LABEL
Enable
User Name
Password
USB1/2
Apply
Cancel

22.7 FTP Screen

Use this screen to set up file sharing via the EMG2926-Q10A using FTP and create user accounts.
Click Management > USB Media Sharing > FTP.
Figure 102 Management > USB Media Sharing > FTP
The following table describes the labels in this screen.
Table 61 Management > USB Media Sharing > FTP
LABEL
Enable FTP
Port
User Accounts
#
Chapter 22 USB Media Sharing
DESCRIPTION
This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Enter the password used to access the shared files. You can enter up to 20 characters.
Only letters and numbers are allowed. The password is case sensitive.
Select the USB port(s) of the EMG2926-Q10A. The configured user can access the files
on the USB device(s) connected to the selected USB port(s) only.
Click Apply to save your changes back to the EMG2926-Q10A.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select this to enable the FTP server on the EMG2926-Q10A for file sharing using FTP.
You may change the server port number for FTP if needed, however you must use the
same port number in order to use that service for file sharing.
Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
This is the index number of the user account.
EMG2926-Q10A User's Guide
157