Account Setup Screen; Time Setting Screen - ZyXEL Communications EMG2926-Q10A User Manual

Table 64 Maintenance > Account (continued)
LABEL
Group
Modify

24.4.1 Account Setup Screen

This screen allows you to change a user account password.
In the Maintenance > Account screen, click an Edit icon under Modify. The screen appears as
shown.
Figure 106 Maintenance > Account: Edit
The following table describes the labels in this screen.
Table 65 Maintenance > Account: Edit
LABEL
Username
Old Password
New Password
Retype to
Confirm
Group
Apply
Cancel

24.5 Time Setting Screen

Use this screen to configure the EMG2926-Q10A's time based on your local time zone. To change
your EMG2926-Q10A's time and date, click Maintenance > Time. The screen appears as shown.
Chapter 24 Maintenance
DESCRIPTION
The belonging of the user account.
Click the Edit icon to open the Account Setup screen. Account Setup screen allows to
change the user account password.
DESCRIPTION
The user account name.
Type the default password or the existing password you use to access the system in this
field.
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays as asterisk (*) for each character you type.
Type the new password again in this field.
This shows the group belonging of the user account (read-only).
Click Apply to save your changes back to the EMG2926-Q10A.
Click Cancel to exit this screen without saving.
EMG2926-Q10A User's Guide
166