Upnp Screen; Technical Reference; Using Upnp In Windows Xp Example - ZyXEL Communications EMG2926-Q10A User Manual

All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.

21.3 UPnP Screen

Use this screen to enable UPnP on your EMG2926-Q10A.
Click Management > UPnP to display the screen shown next.
Figure 88 Management > UPnP
The following table describes the fields in this screen.
Table 58 Management > UPnP
LABEL
UPnP
Apply
Cancel

21.4 Technical Reference

The sections show examples of using UPnP.

21.4.1 Using UPnP in Windows XP Example

This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the EMG2926-Q10A.
Make sure the computer is connected to a LAN port of the EMG2926-Q10A. Turn on your computer
and the EMG2926-Q10A.
21.4.1.1 Auto-discover Your UPnP-enabled Network Device
Click start and Control Panel. Double-click Network Connections. An icon displays under
1
Internet Gateway.
Right-click the icon and select Properties.
2
Chapter 21 Universal Plug-and-Play (UPnP)
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the EMG2926-Q10A's IP
address (although you must still enter the password to access the web configurator).
Click Apply to save the setting to the EMG2926-Q10A.
Click Cancel to return to the previously saved settings.
EMG2926-Q10A User's Guide
147