Emg2926-Q10A Access And Login - ZyXEL Communications EMG2926-Q10A User Manual

Dual-band wireless ac/n gigabit ethernet gateway
Hide thumbs Also See for EMG2926-Q10A:
Table of Contents

Advertisement

If the problem continues, contact the vendor.
5

25.3 EMG2926-Q10A Access and Login

I don't know the IP address of my EMG2926-Q10A.
The default IP address of the EMG2926-Q10A in Router Mode is 192.168.1.1. The default IP
1
address of the EMG2926-Q10A in Access Point Mode is 192.168.1.2.
If you changed the IP address and have forgotten it, you might get the IP address of the EMG2926-
2
Q10A in Router Mode by looking up the IP address of the default gateway for your computer. To do
this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP
address of the Default Gateway might be the IP address of the EMG2926-Q10A (it depends on the
network), so enter this IP address in your Internet browser.
If your EMG2926-Q10A in Access Point Mode is a DHCP client, you can find your IP address from
3
the DHCP server. This information is only available from the DHCP server which allocates IP
addresses on your network. Find this information directly from the DHCP server or contact your
system administrator for more information.
Reset your EMG2926-Q10A to change all settings back to their default. This means your current
4
settings are lost. See
resetting your EMG2926-Q10A.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
179.
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address of the EMG2926-Q10A in Router Mode is 192.168.1.1. The default IP
address of the EMG2926-Q10A in Access Point Mode is 192.168.1.2.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
don't know the IP address of my EMG2926-Q10A.
Chapter 25 Troubleshooting
Section 25.5 on page 179
(Section 10.4 on page
EMG2926-Q10A User's Guide
176
in the Troubleshooting for information on
90), use the new IP address.
Section 25.5 on page
I

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents