Remote Management; Chapter 20 Remote Management; Overview; What You Can Do In This Chapter - ZyXEL Communications EMG2926-Q10A User Manual

20.1 Overview

This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your EMG2926-Q10A from a remote location through
the following interfaces:
• LAN and WAN
• LAN only
• WAN only
Note: The EMG2926-Q10A is managed using the Web Configurator.

20.2 What You Can Do in this Chapter

• Use the WWW screen to define the interface/s from which the EMG2926-Q10A can be managed
remotely using the web and specify a secure client that can manage the EMG2926-Q10A
20.4 on page
• Use the Telnet screen to define the interface/s from which the EMG2926-Q10A can be managed
remotely using Telnet service and specify a secure client that can manage the EMG2926-Q10A
(Section 20.5 on page
• Your EMG2926-Q10A can act as an SNMP agent, which allows a manager station to manage and
monitor the EMG2926-Q10A through the network. Use the SNMP screen to configure SNMP
settings. You can also specify from which IP addresses the access can come
page 140).
• Use the Wake On LAN screen to enable Wake on LAN and remotely turn on a device on the local
network (Section 20.7 on page
• Use the TR069 screen to configure the EMG2926-Q10A's TR-069 auto-configuration settings and
import CA certificates to the EMG2926-Q10A

20.3 What You Need to Know

Remote management over LAN or WAN will not work when:
The IP address in the Secured Client IP Address field
1
the client IP address. If it does not match, the EMG2926-Q10A will disconnect the session
immediately.
138).
139).
142).
EMG2926-Q10A User's Guide
137
C
HAPTER

Remote Management

(Section 20.8 on page
(Section 20.4 on page
2 0
(Section
(Section 20.6 on
143).
138) does not match