ZyXEL Communications EMG2926-Q10A User Manual page 78

Figure 37 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2
The following table describes the labels in this screen.
Table 22 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2
LABEL DESCRIPTION
Security Mode Select WPA or WPA2 to enable data encryption.
WPA Compatible This check box is available only when you select WPA2-PSK or WPA2 in the Security
Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the EMG2926-Q10A even when the EMG2926-Q10A is using WPA2-
PSK or WPA2.
Group Key Update The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
Timer WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key
management) sends a new group key out to all clients. The re-keying process is the
WPA/WPA2 equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is
also supported in WPA-PSK/WPA2-PSK mode.
Chapter 9 Wireless LAN
EMG2926-Q10A User's Guide
78