Navigation Panel - ZyXEL Communications EMG2926-Q10A User Manual

Table 7 Status Screen: Router Mode (continued)
LABEL
Channel
Security
Firewall
Summary
Packet Statistics
WLAN 2.4G Station
Status
WLAN 5G Station Status
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
Interface Status
Interface
Status
Rate

4.2.1 Navigation Panel

Use the sub-menus on the navigation panel to configure EMG2926-Q10A features.
Chapter 4 Router Mode
DESCRIPTION
This shows the channel number which you select manually.
This shows the level of wireless security the EMG2926-Q10A is using.
This shows whether the firewall is enabled or not.
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN 2.4G Station Status screen
page 53). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A's 2.4GHz wireless LAN.
Click Details... to go to the Monitor > WLAN 5G Station Status screen
page 53). Use this screen to view the wireless stations that are currently associated to the
EMG2926-Q10A's 5GHz wireless LAN.
This column shows the type of data the EMG2926-Q10A is recording.
This column shows the actual data recorded by the EMG2926-Q10A.
This is the total time the EMG2926-Q10A has been on.
This field displays your EMG2926-Q10A's present date and time.
This displays what percentage of the EMG2926-Q10A's processing ability is currently used.
When this percentage is close to 100%, the EMG2926-Q10A is running at full load, and the
throughput is not going to improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using bandwidth
management.)
This shows what percentage of the heap memory the EMG2926-Q10A is using.
This displays the EMG2926-Q10A port types. The port types are: WAN, LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
EMG2926-Q10A User's Guide
26
(Section 7.5 on page 52).
(Section 7.6 on
(Section 7.6 on