Table of Contents
Advertisement
10.4 LAN IP Screen
Use this screen to change the IP address for your EMG6765-Q10A. Click Network > LAN > IP.
Figure 49 Network > LAN > IP
The following table describes the labels in this screen.
Table 35 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Cancel
10.5 IP Alias Screen
Use this screen to have the EMG6765-Q10A apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 50 Network > LAN > IP Alias
Chapter 10 LAN
DESCRIPTION
Type the IP address of your EMG6765-Q10A in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your EMG6765-
Q10A will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the EMG6765-
Q10A.
Click Apply to save your changes back to the EMG6765-Q10A.
Click Cancel to begin configuring this screen afresh.
EMG6765-Q10A User's Guide
96
Advertisement
Table of Contents
