Add/Edit A Service - ZyXEL Communications EMG2926-Q10A User Manual

Table 49 Security > Parental Control: Add/Edit new rules (continued)
LABEL
Home Network
User
Internet Access Schedule
Day
Time
Network Service
Network
Service Setting
Add new
service
#
Service Name
Protocol:Port
Modify
Blocked Site/
URL Keyword
Apply
Back

17.2.2 Add/Edit a Service

Click Add new service in the Parental Control > Add/Edit new rules screen to add a new
entry or click the Edit icon next to an existing entry to edit it. Use this screen to configure a service
rule.
Figure 73 Security > Parental Control > Add/Edit new rules > Add/Edit new service
Chapter 17 Parental Control
DESCRIPTION
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select Custom, enter the LAN user's MAC address. If you select All, the rule applies to all
LAN users.
Select check boxes for the days that you want the EMG2926-Q10A to perform parental
control.
Drag the time bar to define the time that the LAN user is allowed access.
If you select Block, the EMG2926-Q10A prohibits the users from using the services listed
below.
If you select Allow, the EMG2926-Q10A blocks all services except ones listed below.
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Port of the new rule.
This shows the index number of the rule. Select the checkbox next to the rule to activate it.
This shows the name of the service.
This shows the protocol and the port of the service.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Click Add to show a screen to enter the website URL or URL keyword to which the
EMG2926-Q10A blocks access. Click Delete to remove it.
Click Apply to save your settings back to the EMG2926-Q10A.
Click Back to return to the previous screen.
EMG2926-Q10A User's Guide
123