Add/Edit A Parental Control Rule - ZyXEL Communications EMG2926-Q10A User Manual

Figure 71 Security > Parental Control
The following table describes the fields in this screen.
Table 48 Security > Parental Control
LABEL
Parental
Control
Add new rules
#
Status
Rule Name
Home Network
User (MAC)
Internet Access
Schedule
Network
Service
Website
Blocked
Modify
Apply
Cancel

17.2.1 Add/Edit a Parental Control Rule

Click Add new rules in the Parental Control screen to add a new rule or click the Edit icon next
to an existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL
filtering settings to block the users on your network from accessing certain web sites.
Chapter 17 Parental Control
DESCRIPTION
Select Enable to activate parental control.
Click this if you want to configure a new parental control rule.
This shows the index number of the rule.
This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
This shows the name of the rule.
This shows the MAC address of the LAN user's computer to which this rule applies.
This shows the day(s) and time on which parental control is enabled.
This shows whether the network service is configured. If not, None will be shown.
This shows whether the website block is configured. If not, None will be shown.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
EMG2926-Q10A User's Guide
121