Table of Contents
Advertisement
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 121 Advanced > Remote Management > Telnet
The following table describes the labels in this screen.
Table 85 Advanced > Remote Management > Telnet
LABEL
Port
Access Status
Secured Client
IP
Apply
Cancel
18.4 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the P-660HN-
F1A's firmware and configuration files. Please see the User's Guide chapter on
firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
P-660HN-F1A User's Guide
DESCRIPTION
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the P-
660HN-F1A using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the P-660HN-F1A using this service.
Select All to allow any computer to access the P-660HN-F1A using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the P-660HN-F1A using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 18 Remote Management
281
Advertisement
Table of Contents
