The Ftp Screen - ZyXEL Communications P-660HW-Tx v3 Series User Manual

The following table describes the labels in this screen.
Table 82 Advanced > Remote Management > Telnet
LABEL
Port
Access Status
Secured Client
IP
Apply
Cancel

18.4 The FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the ZyXEL
Device's firmware and configuration files. Please see the User's Guide chapter on
firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
Use this screen to specify which interfaces allow FTP access and from which IP
address the access can come. To change your ZyXEL Device's FTP settings, click
Advanced > Remote MGMT > FTP. The screen appears as shown.
Figure 120 Advanced > Remote Management > FTP
P-660HW-Tx v3 Series User's Guide
DESCRIPTION
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the ZyXEL Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 18 Remote Management
277