The Ftp Screen; The Snmp Screen - ZyXEL Communications eircom D1000 User Manual

24.4 The FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the Device's firmware and
configuration files. Please see the User's Guide chapter on firmware and configuration file
maintenance for details. To use this feature, your computer must have an FTP client.
Use this screen to specify which interfaces allow FTP access and from which IP address the access
can come. To change your Device's FTP settings, click Maintenance > RemoteMGMT > FTP. The
screen appears as shown.
Figure 136 Maintenance > RemoteMGMT > FTP
The following table describes the labels in this screen.
Table 82 Maintenance > RemoteMGMT > FTP
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Cancel

24.5 The SNMP Screen

Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your Device supports SNMP agent functionality, which allows a manager
station to manage and monitor the Device through the network. The Device supports SNMP version
eircom D1000 modem User's Guide
DESCRIPTION
This displays the service port number for accessing the Device. If the number is grayed
out, it is not editable.
Select the interface(s) through which a computer may access the Device using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the Device
using this service.
Select All to allow any computer to access the Device using this service.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to access the Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 24 Remote Management
199