Lan Setup Screen; Figure 64 - Lan Setup Screen - ADT A-ADRP4E-120 User Manual

Digital Video Recorder
Highlight the box beside Transfer Speed and press the
button. Select the transfer speed
from 1 to 30 ips.
NOTE: The transfer speed you set is the maximum speed, so this speed cannot be
achieved according to the network environment.
NOTE: The transfer speed indicates the number of images which transferred to each
RAS. If two remote sites (RAS) are connecting to the DVR, the number of images
transferred via network will be 'Transfer Speed x 2'.
NOTE: The Transfer Control option will affect DVR's recording performance. The DVR
has a maximum recording speed of 60 NTSC images per second (50 PAL images per
second). The number of remote site (RAS) connected to the DVR does not affect the
recording speed. It will be affected by only Transfer Speed. The local recording speed
will not be affected if the DVR is not connected remotely.
NOTE: If the Transfer Control is not used, the speed of data transfer to remote site will
be same as the local recording speed.
Highlight the box beside Remote Quality and press the
button. Select the image quality
from Very High, High, Standard and Low.

LAN Setup Screen

Figure 64 — LAN Setup screen.
NOTE: You will need to get the appropriate IP Address, Gateway, Subnet Mask and IP
Port Number for each RAS related program (Admin, Watch, Search and Callback) from
your network administrator.
55