Lan Mode - ADT DVR1604HF-U-E User Manual

IMPORTANT:
•
For multiple-channel monitor mode, the system displays in Sub Stream by default. You
cannot modify this manually. All channels are trying to synchronize. The synchronization
effect depends on your network environment.
•
For bandwidth considerations, the system cannot support live viewing and playback at the
same time. The system automatically closes the monitor or playback screen when you are
conducting a search, in order to enhance search speed.
To skip to the discussion of LAN Mode and move on to WAN Mode, go to page 150.

4.3.1 LAN Mode

After logging into the LAN mode, the main window appears.
Section 1
Click the tab of the function you want to switch to: Playback, Alarm, Setup or Logout.
Section 2
This section displays the available individual camera channels that you can select. To initiate a
specific camera, click the CAM icon for that camera. For sample, click on CAM 1 and select either
Main Stream for full HD or Sub Stream for lower bandwidth display.
In the sample screens that follow, CAM1, CAM2, CAM3 and CAM 6 have all been selected to output
sub stream. The icon for each selected camera becomes yellow and the S designation (for Sub
Stream) appears to the right of each. M would appear for HD Main Stream.
DVR1604HF-U-E Hybrid DVR User Guide
Hybrid Standalone DVR User Guide
Figure 4-4
4 Web Service
148