User's Manual
You can assign IDs to each camera by highlighting the ID heading and pressing the
Change the number by highlighting it and using the Up and Down arrow buttons to increase and
decrease the number. The PTZ ID number can be set from 0 to 256.
Alarm In Setup Screen
Highlight Alarm In in the Main menu and press the
appears.
The alarm terminal strip on the back of the DVR has inputs associated with each alarm. You
can set up each input on the Alarm In Setup screen. The inputs are displayed in groups of four.
You can turn each input On (via Alarm I/O or Camera Alarm) or Off. Each input can be given
a title, and the inputs can be set as NO (normally open) or NC (normally closed) independently.
30
Figure 38 — PTZ Device list.
Figure 39 — Alarm In setup screen.
button. The Alarm In setup screen
button.