Table of Contents
Advertisement
User's Manual
After you have created a title and assigned a unit ID number, you can save your changes by
highlighting OK and pressing the
button. Selecting Cancel exits the screen without saving
the changes.
The box beside Version displays the software and hardware version of the DVR. The first two
digits are the hardware version and the last four digits are the software version. For example,
"1.0.2.000" means that the hardware version is "1.0" and the software version is "2.000".
NOTE: You can upgrade the software only in the System Information Change screen.
To upgrade the software, connect the USB device containing the upgrade package file to the
DVR. Highlight Upgrade... and press the
button. The System Upgrade screen appears.
The screen displays the upgrade package file name.
NOTE: If the file system on the USB-IDE hard disk drive or USB flash drive is NOT FAT16
or FAT32 format, format the drive using FAT16 or FAT32 format.
Figure 28 — System Upgrade screen.
Select Start, and enter the Admin password to start the upgrade. The system restarts
automatically after completing the upgrade.
NOTE: Only the system administrator can upgrade the software.
NOTE: You cannot upgrade software during backup.
20
Advertisement
Table of Contents
