Table of Contents
Advertisement
Digital Video Recorder
Date/Time Setup
Highlight Date/Time in the Main menu and press the
button. The Date/Time setup screen
appears.
Figure 29 — Date/Time setup screen.
CAUTION: If you set a date and time that is older than some of your recorded
images, any images with dates and times later than the new setting will be
deleted.
Highlight the first box beside Date/Time and press the
button. The individual sections of
the date highlight. Use the Up and Down arrow buttons to change the number. Use the Left
and Right arrow buttons to move between month, date and year. Once you have the correct
date, press the
button.
Highlight the second box beside Date/Time and press the
button. The individual sections of
the time will highlight. Use the Up and Down arrow buttons to change the number. Use the
Left and Right arrow buttons to move between hour, minutes and seconds. Once you have the
correct time, press the
button.
NOTE: The clock will not start running until you have restarted the unit, so you may
wish to set the time last.
Highlight the box beside Time Zone and press the
button. Select the time zone you are in
from the list and press the
button.
Highlight the box beside Daylight Saving Time and press the
button. Pressing the
button toggles between On and Off.
Highlight the Holiday Setup... box and press the
button. You can set up holidays by
highlighting Add: and pressing the
button . The current date appears.
21
Advertisement
Table of Contents
