Table of Contents
Advertisement
User's Manual
Motion Detector Event Action (Alarm Out) Setup Screen
The DVR can be set to react to motion events differently by activating an internal buzzer or
external alarms.
Figure 55 — Motion Detector Event Action (Alarm Out) setup screen.
Highlight the Sched box and press the
button. A schedule screen appears. Set the schedule
as described earlier.
Highlight the Alarm-Out box and either Beep or the alarm output terminal that you want to
associate with the motion event.
Highlight the Dwell box and set the length of time you want the output activated.
NOTE: When setting the Dwell to "0 sec", the alarm output will be activated throughout
the sensor activation period, and inactive while the sensor is inactive.
46
Advertisement
Table of Contents
